COVID-19: Basics and Biosafety Precautions (by LabCE)

1.5 P.A.C.E. contact hour(s)

(based on 3,547 customer ratings)

Author: Rob Nickla, RBP, M(ASCP) Reviewer: Shoolah Escott, MS, MT(ASCP)

Course provided by LabCE.

COVID-19: Basics and Biosafety Precautions details the latest recommendations for working with specimens that potentially contain the Coronavirus. Rob Nickla, a public health professional, discusses this history of the virus that causes COVID-19 along with all the important details necessary for laboratory professionals to properly protect themselves from Coronavirus infections.

See more courses in: Laboratory Safety

Continuing Education Credits

P.A.C.E.® Contact Hours (acceptable for AMT, ASCP, and state recertification): 1.5 hour(s)
Course number 578-001-21, approved through 1/31/2023
Florida Board of Clinical Laboratory Personnel Credit Hours - Supervision/Administration, Quality Control/Quality Assurance, and Safety: 1.5 hour(s)
Course number 20-828348, approved through 9/1/2022

Objectives

  • Describe common characteristics of SARS-CoV-2, the virus that causes COVID-19.
  • Summarize appropriate decontamination and waste handling procedures for COVID-19 specimens.
  • Recognize appropriate biosafety precautions for handling COVID-19 specimens.
  • Identify proper packaging and shipping requirements for COVID-19 specimens.

Customer Ratings

(based on 3,547 customer ratings)

Users Also Bought

2 P.A.C.E.® contact hours
(3,508 ratings) $20 Add to cart
1.5 P.A.C.E.® contact hours
(2,123 ratings) $20 Add to cart
4 P.A.C.E.® contact hours
(5 ratings) $28 Add to cart
12 P.A.C.E.® contact hours
(7 ratings) $44 Add to cart
2 P.A.C.E.® contact hours
(4,546 ratings) $20 Add to cart

Course Outline

  • Introduction
      • Coronavirus (CoV) Overview
      • Coronaviruses
      • Coronavirus Naming Convention
      • Coronavirus Appearance
  • History, Symptoms, and Transmission
      • COVID-19 Timeline and History - December 2019 through December 2020
      • COVID-19 Symptoms
      • COVID-19 Symptoms (continued)
      • Asymptomatic and Pre-symptomatic
      • COVID-19 Transmission
  • Specimens and Testing
      • COVID-19 Specimens
      • Emergency Use Authorization (EUA)
      • COVID-19 Testing
      • Laboratory Testing
      • CLIA
  • Regulations, General Hazards, and Viability
      • Regulations
      • Regulations (cont.)
      • General Laboratory Hazards
      • SARS-CoV-2 Viability
      • Risk Mitigation
      • Laboratory COVID-19 Safety
  • Cleaning, Disinfection, and Decontamination
      • Cleaning and Disinfection
      • Cleaning and Disinfection (continued)
      • Disinfectants, Decontamination and Sterilization
      • Disinfectants, Decontamination and Sterilization (continued)
      • SARS-CoV-2 Decontamination
      • Manufacturer Instructions for Disinfectant Use
      • Disinfectant Preparation
      • Antiseptic
      • Laboratory COVID-19 Waste
      • Spills
  • Coronavirus Biosafety Precautions
    • Risk Assessment
      • Risk Assessments
      • Risk Assessments (continued)
    • Precautions and Biosafety
      • Standard Precautions
      • Standard Precautions (continued)
      • Biological Safety Levels (BSLs)
      • Biosafety
    • Engineering Controls and PPE
      • Engineering Controls
      • Biological Safety Cabinet (BSC)
      • Administrative Controls
      • Personal Protective Equipment (PPE)
      • Respirators and Masks
    • Training
      • Training
    • Infectious Particles and Reducing the Spread
      • Infectious Particles
      • Infectious Particles (continued)
      • Reducing the Spread of COVID-19
  • Shipping
      • Shipping Training
      • Shipping Requirements
      • Shipping Laboratory Specimens
      • Category B Shipments
      • Category B Labeling and Marking
  • References
      • References

Additional Information

Level of Instruction:  Basic
 
Intended Audience: Medical laboratory scientists, medical technologists, and technicians. This course is also appropriate for any staff working in a medical facility that may come into contact with laboratory specimens.  
 
 
Author Information:  Rob Nickla, RBP(ABSA), M(ASCP),  began his public health career in 2004 at the Arizona State Public Health Laboratory (ASPHL) working in Mycobacteriology, Bacteriology, and Virology. While there, he became the State Training Coordinator and Bioterrorism Training Coordinator in the Bioemergency Response Section and actively participated in several APHL Special Interest Groups for Basic Microbiology, Biosafety & Biosecurity, and Select Agent Training. He served on the ASPHL Safety Committee for several years and helped develop and conduct many in-house safety related trainings. In 2012, he accepted an Associate Biosafety Officer position in the Environmental Health and Safety Department at Arizona State University (ASU). Currently, Rob is the BT (biological threat) and CT (chemical threat) LRN (Laboratory Response Network) Coordinator and State Training Coordinator with the Oregon State Public Health Laboratory (OSPHL). He currently sits on the Clinical Laboratory Assistant Program’s Student Advisory Committee with Clackamas Community College, and on the Medical Technologist Program’s Student Advisory Committee with Portland Community College.
 
Reviewer Information:  Shoolah Escott, MS, MT(ASCP), currently works as a biosafety and biosecurity consultant and trainer. She has over 14 years of experience working with the CDC and has experience as a regional coordinator with APHL. Earlier in her career, she was the manager of microbiology at Memorial hospital in the greater Boston area and more recently served as the Biosafety Manager and Alternate Responsible Official for the Massachusetts State Public Health Laboratory. 

How to Subscribe
MLS & MLT Comprehensive CE Package (by LabCE)
Package of 114 online courses$95
Add to cart
Single online course$20
Add to cart
  • Order for instant access through any computer, any browser.
  • No shipping, faxing, or waiting for certificates.
  • Print or save your certificate of completion as soon as you've completed the course.
  • You'll have 90 days to complete your purchased courses.
Course provided by LabCE.
CDC generated illustration of SARS-CoV-2 virus.


shutterstock 1695445129


BSC work


sneeze


COVID-Taxonomy1-2



 
ASCLS CE's design and platform are provided by MediaLab, Inc.